Pioneering the future of power testing and monitoring
Large HV Motors monitoring
Power View MLS
Power View MLS—the HV motor monitor that turns the motor itself into a precision sensor. It learns each machine’s “known good” electrical signature under real operating load, then continuously compares live data to that baseline to catch the earliest deviations. That means earlier warnings for phase imbalance, overcurrent, insulation degradation, rotor-bar and bearing issues, misalignment, unusual vibration, and even environmental impacts like temperature, humidity, or contamination. When something drifts, you get clear, customizable real-time alarms—not just raw numbers—so maintenance can act before a small trend becomes a big outage. A local display shows essentials on site, while the Substation Digital cloud dashboard correlates trends with electrical tests and visual/thermal inspections, and integrates with existing SCADA for fleet-wide visibility. Easy to deploy on single motors or across entire facilities, MLS upgrades maintenance from periodic checks to proactive, data-driven decisions that cut downtime, costs, and risk.
Power View MCM
Power View MCM solution brings always-on condition visibility. Affordable even on small high voltage motors, this device with ultra-long-range communication helps monitor assets spread across plants or remote sites without new cabling. It tracks the failure modes that matter—insulation, bearing and mechanical issues, overloads, and thermal stress and current signature analysis. It features 3-axis vibration with FFT, load current, and both stator and bearing temperatures, leakage and load current with analysis and most advanced risk assessment diagnostic software. Installation is quick and clean making retrofits on small and larger frames practical during a short stop.
Rotor Flux monitoring
See problems before they become failures. Rotor flux monitoring gives your HV motors continuous, online visibility into the magnetic heart of the machines spotting broken bars, end-ring issues, developing turn shorts, and air-gap asymmetry early and under real operating loads. Non-intrusive and retrofit-friendly, it delivers actionable trends and alarms without stopping the motor or adding maintenance burden. You get clear diagnostics, not just data, so teams can schedule repairs instead of reacting to trips. It performs through start-ups, transients, and variable process conditions to catch faults traditional vibration alone can miss. Seamless SCADA/CMMS integration turns insights into work orders and uptime. Pair it with current signature and PD monitoring for a 360° electrical-mechanical view—and extend asset life while cutting unplanned outages.
Shaft voltages and currents
Protect your bearings from invisible electrical damage. VFDs inject high-frequency common-mode voltage that charges the shaft until the oil film breaks down—causing nanosecond EDM discharges that pit, frost, and flute races, drive up vibration, and shorten motor life. Verify and trend it like any other risk: monitors shaft-to-frame voltage and grounding-strap current under real loads, confirm mitigation. The payoff is simpler bearings, longer intervals between overhauls, and fewer surprise trips.
