Pioneering the future of power testing and monitoring
Hydro Generator Condition Monitoring
Hydro Generator vibrations, bearing temperature and
insulation monitoring. The system’s basic setup includes vibration (absolute and relative), current, voltage, and temperature sensors to detect early mechanical and insulation issues. It can be further expanded with rotor flux, partial discharge, and air gap monitoring for full generator health assessment
Rotor flux monitoring
Rotor flux monitoring for hydro generators gives a pole-by-pole view into catching field winding turn shorts, pole imbalance, and in some cases eccentricity long before they escalate. It tracks flux symmetry through starts, synchronization, and load swings, so water level changes and transients do not hide problems. Non-intrusive sensors and retrofit-friendly installation mean no intrusive outages or extra maintenance burden. You get clear diagnostics and trending heat-maps per pole, with alarms tied to actionable thresholds, not just raw waveforms. Integrate with excitation, vibration, and temperature data for an only source of truth on rotor health. The result: higher availability, tighter efficiency, and planned maintenance windows instead of forced outages.
MLS Hydro Generator Monitoring
Power View Hydro generator MLS turns the generator to become its own sensor. It learns each unit’s “known-good” electrical fingerprint at synchronism and then tracks live deviations in real time. That reveals pole-to-pole flux asymmetry, field-winding turn shorts, rotor eccentricity/misalignment, phase imbalance, and early insulation drift while the machine is on-line. When something shifts, you get clear, actionable alarms and simple health indices—not raw waveforms—on a local HMI and in the Substation Digital fleet dashboard. Retrofit-friendly and maintenance-free, MLS overlays your existing excitation/SCADA data to turn routine generation into continuous diagnostics—boosting availability, efficiency, and confidence.
Rotor shaft current and voltages monitoring
Make shaft-voltage risk visible before it becomes bearing damage. Our online monitoring tracks shaft voltage and earthing-brush/ground return current in real time, capturing high-speed spikes and discharge events that lead to EDM, pitting, and washouts. Smart alarms separate harmless static from damaging discharge energy and rising repetition rates, turning raw signals into clear actions. Retrofit is fast and non-intrusive. Result: protected bearings, longer overhaul intervals, and fewer forced outages across your hydro fleet
Fire Alarm
Protect critical assets with addressable fire detection sensors. Power View Fire Alarms smart room detectors (ZENDER) with long-range wireless that spans kilometers and supports hundreds of devices—ideal for substations and wind farms. Remote, bidirectional monitoring in Substation Digital enables annual inspections without site visits, event-based alerts, and rich diagnostics (battery status, chamber pollution, obstruction, tamper, self-tests). The ZENDER detector is DIN EN 14604–certified with a 10-year battery, test/mute functions, and AES-128 secured reporting; HW305 adds wide airflow/temperature ranges and remote test options for challenging outdoor environments. Rugged design and standards compliance keep performance reliable temperature swings turning early sparks and overheating into fast, targeted actions.